Processor Socket - MSI MEG X570 ACE Kurzanleitung

Processor Socket

Introduction to the AM4
processor
The surface of the AM4 processor
has a yellow triangle to assist in
correctly lining up the processor for
motherboard placement. The yellow
triangle is the Pin 1 indicator.
Important
When changing the processor, the system configuration could be cleared and reset
y
BIOS to default values, due to the AM4 processor' s architecture.
Always unplug the power cord from the power outlet before installing or removing
y
the CPU.
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
y
is necessary to prevent overheating and maintain system stability.
Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
y
your system.
Overheating can seriously damage the CPU and motherboard. Always make sure
y
the cooling fans work properly to protect the CPU from overheating. Be sure to apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
If you purchased a separate CPU and heatsink/ cooler, Please refer to the
y
documentation in the heatsink/ cooler package for more details about installation.
This motherboard is designed to support overclocking. Before attempting to
y
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI
®
operation beyond product specifications.
Distance from the center of the
CPU to the nearest DIMM slot.
does not guarantee the damages or risks caused by inadequate
53.62
mm
Overview of Components
17