Cleaning And Maintenance - Timken VHIN 10 Bedienungsanleitung

WARNING
Failure to observe the following warnings could
create a risk of death or serious injury.
• If in any doubt, isolate the machine and contact your
local distributor. Failure to follow proper maintenance and
repair procedures can result in equipment failure or create
a risk of serious bodily harm.
The induction heater can be used in º C or º F
To change this follow these steps:
• Press the temperature button for 10 seconds, you will
hear a short 'bleep'
• Then wait, after another 10 seconds a second 'bleep' will
sound and in the display the temperature mode will switch
from Celsius to Fahrenheit or vice versa.
• The heater is now ready for use in the newly set
temperature mode.
8.

Cleaning and Maintenance

• Store in a dry, frost-proof area, free from humidity.
• Keep clean with a soft, dry cloth.
• Keep the contact parts of the poles clean. Grease regularly
with an acid-free grease for optimal contact with the yokes
and to prevent corrosion (on swing-arm models, also
grease the vertical pin regularly).
• Contact your supplier if there is any suspicion of
malfunctioning
Failure to observe the following warnings could
create a risk of death or serious injury.
• Proper maintenance and handling practices are critical.
Failure to follow installation instructions and to maintain
proper lubrication can result in equipment failure, creating
a risk of serious bodily harm.
9
WARNING