General Safety Regulations - Ecom Tab-Ex 01 DZ1 Bedienungsanleitung

4.1 General safety regulations

Operating conditions:
• It must be ensured that the device is not taken into zones 0 or 20.
SPECIAL CONDITONS FOR SAFE USE
(denoted by X after the certificate number)
• The equipment shall only be used in areas with a low risk of mechanical
impact.
• The equipment shall not be opened by the end user for any reason; if either of
the equipment's enclosures are opened or damaged, the following conditions
apply:
• The equipment shall be removed from the explosive atmosphere immediate-
ly and will not be suitable for re-use until it is repaired by the OEM.
• If the outer enclosure is damaged, precautions shall be taken to ensure that
the internal flameproof enclosure is not subject to static charging.
• If the inner flameproof enclosure is opened, the equipment shall never be
used in an explosive atmosphere unless it has been repaired and re-sealed
by the OEM.
• Electrical connections to the equipment are not permitted in the hazardous area.
• When the ambient temperature is greater than +45°C the integrated LED shall
only be used (powered) for individual periods of up to 10 minutes, with a total
of no more than 1 hours use per day.
Charging and data connections:
• Charging and wired data connection via USB is only allowed outside the ha-
zardous areas and only allowed by using the ecom Safety Box SB T01 X1 or the
Docking Station DS T01 X1.
• The Tab-Ex 01 DZ1 may only be charged in a temperature range of -5°C to 45°C.
• The device may not be repaired, see Section 7.
• The specifications of assembly drawing 100016AL07A must be observed.
Power supply requirements:
• It must be ensured that the power supply used fulfills all national approvals
and requirements.
• The Tab-Ex 01 DZ1 is suitable up to an input voltage and current of Um = 250V,
Im = 100A. It must be ensured that the electricity supply does not exceed these
values.
5