ASROCK K10N780SLIX3-WiFi Bedienungsanleitung Seite 19

Step 3. Reverse the card direction so as to have the "X16 MODE" wording side toward
the retention slot base. Insert the card into the bottom of the base.
Step 4. Push the card down into the retention slot till both the retention arms firmly
hold the card into position. Also, keep away from touching the connectors
(Golden Fingers).
Step 5. Install the identical SLI
cause different types of graphics cards will not work together properly. (Even
the GPU chips version shall be the same.) Insert one graphics card into PCIE1
slot and another graphics card to PCIE2 slot. Make sure that the cards are
properly seated on the slots.
Step 6. If required, connect the auxiliary power source to the PCI Express graphics
cards.
Step 7. Align and insert the SLI Bridge to the goldfingers on each graphics card. Make
sure that the SLI Bridge is firmly in place.
Step 8. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE1 slot.
ASRock
TM
-ready graphics cards that are NVIDIA
K10N780SLIX3-WiFi Motherboard
®
certified be-
1 9 1 9 1 9
1 9 1 9