ubbink Ubiflux W180 Installationsvorschriften Seite 121

Setting values
STEP
DESCRIPTION
NO.
Exhaust fan mode
20
switching input 1
21 Selection input 2
22 Minimum voltage input 2
23 Maximum voltage input 2
Conditions
24
switching input 2
Supply fan mode
25
switching input 2
Exhaust fan mode
26
switching input 2
27 Geo-heat exchanger
Minimum temperature
geo-heat exchanger
28
(Below this temperature
the diffuser opens.)
Maximum temperature
geo-heat exchanger
29
(Above this temperature
the diffuser opens.)
30 RH sensor
Sensitivity
31
RH sensor
FACTORY SET-
SETTING RANGE
TINGS "+"
0 (= Exhaust fan off)
1 (= Absolute min. flowrate 50 m
2 (= Flowrate setting 1)
3 (= Flowrate setting 2)
5
4 (= Flowrate setting 3)
5 (= Multiple switch)
6 (= Maximum flowrate
7 (= No signal exhaust fan)
0 (= NO contact)
1 (= 0 - 10 V input)
2 = NC contact)
1
3 (= switching output 2/ bypass active  12V;
bypass not active  0V)
4 (= switching output 2/ bypass active  0V;
bypass not active 12V)
0.0 V 0.0 V - 10.0 V
10.0 V 0.0 V - 10.0 V
0 (= Off)
1 (= On)
2 (= On if conditions
0
bypass function active)
3 (= Bypass function control)
4 (= Bedroom diffuser)
0 (= Supply fan off)
1 (= Absolute min. flowrate 50 m
2 (= Flowrate setting 1)
3 (= Flowrate setting 2)
5
4 (= Flowrate setting 3)
5 (= Multiple switch)
6 (= Maximum flowrate)
7 (= No signal supply fan)
0 (= Exhaust fan off)
1 (= Absolute min. flowrate 50 m
2 (= Flowrate setting 1)
3 (= Flowrate setting 2)
5
4 (= Flowrate setting 3)
5 (= Multiple switch)
6 (= Maximum flowrate)
7 (= No signal exhaust fan)
OFF (= Diffuser control geo-heat
exchanger off)
OFF
ON (= Diffuser control geo-heat
exchanger on)
5.0 °C 0.0°C - 10.0°C
25.0 °C 15.0°C - 40.0°C
OFF (= RH sensor switched off)
OFF
ON (= RH sensor switched on)
-2 most sensitive
-1 ↑
0 0 basic setting RH sensor
+1 ↓
+2 least sensitive
Ubiflux W180 / W180+
Chapter 13
DISPLAY TEXT +
STEP
SYMBOLS
/h)
3
CN1
V2
0.5 V V2 MIN
0.5 V V2 MAX
CN2
/h)
3
CN2
/h)
3
CN2
EWT
0.5 °C EWT T-
0.5 °C EWT T+
37