Chauvet DJ BANK FX Kurzanleitung Seite 3

EN
Product
Description
Overview
AC Power
Power Linking
Fuse
Replacement
Mounting
Mounting
Diagram
The DJ Bank™ FX is compact light with built-in Sound-Active mode.
Sound-Sensitivity Adjustment Knob
Power Out
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 94 DJ Bank™ FX units at 120 VAC and 97 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Mounting Clamp
Mounting Bracket
Fuse Holder
3
DJ Bank™ FX QRG
Speed Adjustment Knob
Power In
Safety Cable
Bracket
Adjustment
Knobs