Product Components; Device Display - Lanaform New Vapolux Bedienungsanleitung

the condensation on the cold surfaces or the cold walls of the room. To measure the room's humidity correctly, use a
EN
hygrometer available in most specialist shops and hypermarkets.
• The "NEW VAPOLUX" humidifier is designed for indoor and domestic use only.

PRODUCT COMPONENTS

(1) Diffuser sprinkler tip
(2) Water reservoir
(3) Base of the device
(4) Control panel and display screen
(5) Demineralisation cartridge (filter)
(6) Water reservoir lid

DEVICE DISPLAY

(1) "On/off" button
(2) Button for producing negative ions
(3) Button for adjusting level of emission intensity
(4) Button for adjusting relative humidity level
(5) Button for adjusting timer
(6) Negative ion production display
(7) Relative humidity level display
(8) Timer display
(9) Level of emission intensity display
INSTRUCTIONS FOR USE
Features:
• Cool mist humidifier
• LCD screen
• Automatic detection and display of ambient relative humidity
• Capacity for programming desired humidity level
• Timer: 12 hours with programming in 1-hour stages
• 3 levels of vapour emission intensity: low, medium, high
• Negative ion production
• Remote control
• Capacity of water reservoir 4.5L
• Maximum flow rate of cool mist: 400ml/hour
• +/- 11 hours of continuous diffusion at 400ml/hour
• Automatic shutoff device when the water reservoir is empty
• Automatic shutoff device when the water reservoir is lifted up
• Quiet operation (≤35dB)
Features:
• Air humidifier
• Eliminates electrostatic charges
• Improves ambient air quality
6
(see illustrations, Figure 1):
(see illustrations, Figure 2):