Tr Oubleshooting - USRobotics 9113 Installationsanleitung

6. Select the manufacturer and model of your printer. Click
N o t e : If your printer is not in the list, your printer drivers were not installed
correctly. Repeat "Step One: Local Printer Installation" on page 9.
7. When prompted, select
8. Click .
Finish
Step Four: Verify the Printer's Connectivity
1. Do one of the following:
" Windows Vista: Click Windows
>
Sound Printers
" Windows XP: Click Windows
" Windows 2000: Click Windows
2. Right-click on your printer and select
3. Click
Print Test Page
N o t e : If the test page fails to print, see "Troubleshooting" in the User Guide
on the USRobotics Installation CD-ROM for additional information.

Tr oubleshooting

This basic procedure addresses a number of symptoms that you might experi-
ence with your gateway:
1. Verify the power cord and all the Ethernet cables are connected correctly.
This includes the cables connecting the gateway and all the computers in the
network. See the Installation illustrations on page 4.
2. Ensure that the power outlet to which the gateway is connected is a live out-
let.
3. Refer to the LED descriptions in this guide and then check the LEDs on the
gateway to make sure you are receiving power and all ports are functioning.
See the LED descriptions on page 1.
4. For wireless connections only: Low link quality or range can be caused by
environmental interference, such as lead-based paint and concrete walls, or
some electronic items, such as 2.4GHz phones. Try to move the antenna of
the gateway or reposition the wireless clients to improve the link quality.
5. For wireless connections only: Verify that each device connecting to the gate-
way is set to Infrastructure mode. Set the Network name or SSID in the wire-
less adapter's settings to the
verify that you are using the same wireless security type. Refer to your wire-
less adapter's documentation to determine how to change these settings.
to set this printer as your default printer.
Yes
.
Start
Start
. The test page should print successfully.
Network name
>
Start Control Panel
>
Printers and Faxes
> >
Settings Printers
.
Properties
that is used in the gateway, and
English
.
OK
>
Hardware and
.
.
11