USRobotics 9113 Installationsanleitung Seite 10

English
4. Select your country and your Internet Service Provider (ISP) from the drop-
down lists on the
list, select
Other
your ISP.
You may need to enter the user name and password for your ADSL connec-
tion after making your selections.
5. Click .
Save
6. You will be directed to the
the page that indicates if your ADSL connection has been established. If the
message indicates that there is no ADSL connection, see "Troubleshooting"
on page 11 of this guide.
7. Click the
Login
N o te : The user name
the future when you log in to the gateway.
8. Close EasyConfigurator.
For expanded EasyConfigurator details, see the User Guide on the USRobotics
Installation CD-ROM.
Step Four: Configure Your Wirless Security Settings
1. To configure your wireless security settings, press the
button on the back of the gateway for one full second. This will set WPA2
and WPA (PSK) wireless security and configure a pass phrase/network key
for your wireless network.
C a u ti o n : If you have do not enable a wireless security method on the
2. If you will be connecting this computer to your network via a wireless con-
nection, you can unplug the Ethernet cable from the gateway and your com-
puter, install your wireless adapter, then connect your computer to your
gateway using a wireless connection. For instructions on installing your wire-
less adapter, see your wireless adapter's documentation.
6
page. If your country or ISP does not appear in the
Internet
for the country and manually enter the settings provided by
Status
tab, enter a password for the
and the password you enter will be used in
admin
gateway, your wireless network will be insecure. Unautho-
rised wireless devices may be able to connect to your net-
work, use your Internet connection, and access computers on
the network.
tab. There will be a message at the top of
account and click
admin
.
Save
SecureEasySetup