DJI Osmo Pocket Bedienungsanleitung Seite 4

Usage
1. Toggle the opening switch down and the Charging Case will open automatically.
2. You can place four ND filters, two smartphone adapters, and two microSD cards as
shown below.
The accessories mentioned in the Osmo Pocket Charging Case User Guide are
sold separately, except for those listed under "In The Box".
3. Place the Osmo Pocket in the Charging Case as shown below. Make sure to
position the camera as illustrated below and that the universal port of the Osmo
Pocket attaches to the side of the Charging Case. Toggle the switch to secure the
Osmo Pocket.
4. Close the Charging Case manually to charge the Osmo Pocket. Please note that
the Osmo Pocket will not charge while the Charging Case is open.
5. To charge the Charging Case and the Osmo Pocket simultaneously, connect the
Power Port (USB-C) of the Charging Case to an external power source.
Every time you open and then close the Charging Case, the Status LED will show
the current battery level. Refer to the Status LED Descriptions section for more
information.
Status LED Descriptions
Charging Status LED Descriptions
Both the Charging Case and the Osmo Pocket will be charged if there is an external
power source connected. When there is no external power source connected, only
the Osmo Pocket will be charged.
2
microSD Cards
Smartphone
Adapters
ND Filters