Book entry (see "Lyrics as text files associated to a SongBook
entry 2.0" on page 10).
Upper 1 Sound FX settings overriding
Performance/STS settings
In Sound mode, you can assign a Sound two effects (FX1 and
FX2). Now, when you assign a new Sound to the Upper 1 track,
the FX1 and FX2 settings saved with that Sound are automati-
cally selected. These settings override Performance/STS settings
for this track. Whether Sound or Performance/STS effect param-
eters will be considered, depends on the status of the "Upper 1
FX Lock" parameter in Global mode.
• If the Upper 1 FX Lock is turned on, when assigning a new
Sound to the Upper 1 track, Performance/STS parameters are
left untouched; selected effects, and FX Send values, are not
changed.
• If the Upper 1 FX Lock is turned off, when assigning a new
Sound to the Upper 1 track, Sound parameters are considered;
selected effects, and FX Send values, are changed according to
the Sound's stored data.
Note: If effects associated to the selected Sound are not compatible
with effects already assigned to the CD FX block, C and/or D Send
values on the other Keyboard tracks will be automatically set to
zero.
For example, assume a chorus effect is assigned to the D effect pro-
cessor. If the new Sound assigns a distortion effect to the D effect
processor, the D Send value on the Upper 2, Upper 3, and Lower
tracks will be set to zero, to avoid these tracks sound in the wrong
way. This way, the Upper 1 track (usually the most important one
for solo playing) will sound with the needed effect, while the other
Keyboard tracks will just sound dry.
KORG Pa1X – Operating System release 2.0
MIDI Setup as pop-up menus
MIDI Setup parameters are now pop-up menus, instead of sim-
ple text fields. This will make selecting them easier.
in Song Play and Sequencer mode
1.50
Style Play Mode
Solo Track command
The Solo Track command has been
added to the page menu of the Style
Play mode.
Select the track to be soloed, then
check this item. You will hear only
the selected track, and the 'Solo'
warning will flash on the page
header.
Uncheck this item to exit the Solo function.
The Solo functions works in a slightly different way, depending
on the selected track:
• Keyboard track: The selected Keyboard track is the only track
you can hear when playing on the keyboard. All other Keyboard
tracks are muted. The status of the Style tracks is unaffected.
• Style track: The selected track is the only Style track you can
hear. All other Style tracks are muted. The status of the Keyboard
tracks is unaffected.
Bass Inversion and Memory functions con-
trolled by means of Velocity
With operating system version 2.0, the Bass Inversion and Mem-
ory functions have been added to the Velocity Control feature.
To select this function, use the Style Play > Preferences > Style
Pref > Velocity Control parameter.
Style Play Mode
in Style Play mode
in Global mode
5
1.50
1.50
2.0