Keysight Technologies Keysight U1401B Schnellstart Handbuch Seite 13

Performing Resistance Measurement and
Continuity Test
Disconnect circuit power and discharge all
CAUTION
high-voltage capacitors before measuring
resistance to prevent possible damage to the
instrument or the device under test.
1 Set the rotary switch to
2 Connect the red (+) and black (–) test leads to
3 Probe the resistor (or shunt) leads and read
4 To perform continuity test, press
Keysight U1401B Quick Start Guide
the INPUT terminals.
the display.
toggle the audible continuity function on or off.
.
to
13