Aukey DRA2 Bedienungsanleitung Seite 5

Using a MicroSD Card
The dash camera doesn't include internal storage and requires a
microSD card (Class 10+ recommended and 256GB Max supported) to
function. Use a high-quality, branded card for maximum reliability. Insert
a microSD card into the mirror dash camera microSD card slot. Later,
when the camera is powered on, format it ('Format SD Card' in dash
camera 'General Settings') to prepare the card for first use in the dash
camera. Formatting will permanently erase any data on the microSD
card. For best performance, format periodically (after backing up any
important files).
Testing the Dash Camera System
You may wish to connect and test the dash camera system before
proper, long-term installation in your car (or other vehicle). Connect the
two cables to the mirror dash camera and plug the car charger into
your car 12V/24V outlet (see 'Installing the Dash Camera System' steps 2
& 3 below); then switch on the car ignition to power the 12V/24V outlet.
The dash camera system will power on automatically. Check that both
cameras are operating correctly. See 'Using the Touchscreen Buttons'
and other sections for information on operation.
- 03 -