SFA SANIPACK Installationshinweise Seite 7

8490 NOTICE SANIPACK-SANINSIDE N¡126:5926 NOTICE N¡125
UK
1
DESCRIPTION
SANIPACK /SANINSIDE
®
SANIPACK /SANINSIDE
®
SANIPACK /SANINSIDE
®
SANIPACK
Please note the following warning signs:
WARNING
2
LIST OF ACCESSORIES INCLUDED-
3
DIMENSIONS-
4
TECHNICAL DATA
Application
WARNING:
5
PERFORMANCE CURVE-
6
VERTICAL/HORIZONTAL PUMPING
COMBINATIONS-
7
INSTALLATION
SANIPACK /SANINSIDE
®
WARNING:
EXAMPLE OF INSTALLATION
7a
7a1 7a2
WARNING:
WARNING: A screwdriver or other tool should be
required to remove the access panel.
®
®
®
/SANINSIDE
® ®
1 WC + Washbasin
+ Shower
®
7a3
11/05/12 11:44 Page 8
CONNECTION TO A WC
7b
WARNING:
CONNECTION TO SIDE-INLETS
(SHOWER AND WASHBASIN)
7c
WARNING:
CONNECTION OF A WASHBASIN
7d
A
CONNECTION OF THE DISCHARGE PIPE
7e
B
SANIPACK
WARNING:
ELECTRICAL CONNECTION
7f The electrical installation should be carried by a
qualified person. All wiring must conform to
BS7671, 1992 requirements for electrical
installations.The unit requires a 220/240V single
phase AC 50 Hz supply (UK specification).
The unit should be connected to a fully earthed electri-
cal supply (class 1). It must be wired into an unswitched
fused fixed wiring connector protected by a 5 amp fuse
and a residual current detector (30 mA).
8
SANIPACK /SANINSIDE
®
B
D
7c
F
G
/SANINSIDE
® ®
®
A
B
H