Herunterladen Inhalt Inhalt Diese Seite drucken

Operation - Velleman HRJP009 Bedienungsanleitung

Mit einstellbarer leistung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

VTSS6 – DUAL POWER SOLDERING IRON
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be
taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will not
accept responsibility for any ensuing defects or problems.
• DO NOT TOUCH THE TIP. A HOT TIP MAY CAUSE
SERIOUS BURNS.
• Use the soldering iron on a heatproof workbench.
• Place the soldering iron in its holder after use. Let a hot
soldering iron cool down naturally and do not immerse in water.
• Do not crimp the power cord and protect it against damage.
Have an authorised dealer replace it if necessary.
• Keep the device away from children and unauthorised users.

3. Operation

• Make sure the iron tip is tightly fixed. Make sure that the
available voltage does not exceed the voltage stated in the
specifications of this manual and connect the soldering iron to
the mains.
• Select the output power (30W or 60W) and let the soldering
iron heat.
• Tin the iron tip by applying some rosin core solder. Heat the
connecting points (not the solder) and apply some solder to the heated parts. Remove the
soldering iron and let the solder cool. Clean the tip after each solder job by briefly brushing the
tip onto a damp sponge.
• Place the soldering iron in its holder, switch off and unplug from the mains after use.
VTSS6
2
VELLEMAN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vtss6

Inhaltsverzeichnis