Troubleshooting - Panasonic GP-US932CSAE Handbuch

Troubleshooting

Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is
not described below.
Symptom
No image displayed
Camera with no response to
the button operation on the
front face of the CCU
The lighting indicator of the
[SCENE] button unchanged
The lighting indicator of the
[GAIN] button unchanged
Only the color bar displayed
The hue [MATRIX] unad-
justable in the menu
Cause/solution
• Are the cables appropriately connected to the video
output connector, S-VIDEO output connector,
RGB/YPbPr output connector, HDMI output connector,
and SDI output connector, respectively?
Check whether the connection is appropriately estab-
lished.
• Is the video output signal format of each output connec-
tor compatible with the video format displayable on the
monitor?
Check whether the video output signal format is com-
patible with the video format.
• Is the monitor luminance appropriately adjusted, or is
the contrast appropriately adjusted?
Check whether the monitor settings are appropriate.
• Is the function setup switch No. 4 set to "ON"?
Set the function setup switch No. 4 to "ON".
• Pressing once displays the state.
Press the [SCENE] button repeatedly until your target
indicator lights.
• Pressing once displays the state.
Press the [GAIN] button repeatedly until your target
indicator lights.
• Is the camera cable appropriately connected at both
the connector of the CCU and the connector of the
camera head?
Check whether the connection is appropriately estab-
lished.
• Is the camera cable appropriately connected at both
the connector of the CCU and the connector of the
camera head?
Connection between the camera head and camera
cable is required to adjust the image quality.
Check whether the connection is appropriately estab-
lished.
Reference
pages
10, 11
10, 19
—
10
8
8
8
8
27