Covidien Nellcor SpO2 Gebrauchsanleitung Seite 3

en
Adult Respiratory Sensor
SpO , RR
2
Identification of a substance that
is contained or present within the
product or packaging
Does not contain
natural rubber latex
components
Identification of a substance that is
not contained or present within the
product or packaging
Protected against access to hazardous
22
parts with a finger and protected
against vertically falling water
drops when sensor tilted up to 15°
This product cannot be adequately cleaned and/or sterilized by the
user in order to facilitate safe reuse, and is therefore intended for single
use. Attempts to clean or sterilize these devices may result in bio-
incompatibility, infection or product failure risks to the patient.
This product contains DEHP. The intended use limits exposure to transient
contact, minimizing the risk of DEHP release from the device. In order to
avoid undue risk of DEHP exposure in children and nursing or pregnant
women, product should only be used as directed.
Directions for Use
Indications/Contraindications
The Nellcor™ Adult Respiratory Sensor, when used in conjunction with
a Nellcor pulse oximeter and the Nellcor Respiration Rate Software, is
indicated for single patient use when continuous noninvasive arterial
oxygen saturation, pulse rate and respiration rate monitoring are required
for adult patients weighing more than 30 kg.
The Nellcor Adult Respiratory Sensor is contraindicated for use on patients
who exhibit allergic reactions to the adhesive tape.
Instructions for Use
1. Remove plastic backing from the sensor and locate transparent
windows (a) on the adhesive side. Windows cover the sensor's optical
components. (1)
An index finger is the preferred sensor location. Alternatively, apply the
sensor to a small thumb, small finger, or great toe.
Do not use if
package is opened or
damaged
Contains components
manufactured with
DEHP
Do Not Use
with MRI
3