Taurus MITHOS TITANIUM Anleitung Seite 15

cutting the hair gradually until the
height of the ears (Fig.2)
Step 2 – Back of head:
- Attach comb guide size 9 /
12mm and continue with the
back of the head (Fig.3)
Step 3 – Side of head:
- Attach a new shorter guide,
size 3 / 6 mm to trim the side-
burns.
- Attach the longest comb guide
size 9 / 12 mm again and con-
tinue until you reach the top of
the head.
Step 4 – Top of head:
- Using comb guide size 9 / 12
mm, pass the appliance from
the back to the front, against
the growth of the hair (Fig.4).
In some cases it's necessary to
go over what you have done a
second time from front to back.
- The comb guide size 3 / 6 mm
is for when you want to achieve
a more precise cut.
- Use comb guides size 12 mm
to leave hair at a longer length.
Hold the hair up with the comb
or the comb and your fingers
and cut.
- Always work form back to the
front reducing the length bet-
ween your fingers or the comb
and the head gradually.
Step 5 – Final touch:
- Finally use the appliance
without attaching any comb gui-
des to the blades to cut the hair
around the base of the neck, the
sides of the neck and the ears.
- To make sideburns straight,
turn the appliance over to use
the upper blades (Fig.5). Move
the appliance adapting it the
physiognomy of the head. To
achieve more precise results use
a shaver
Once you have finished using
the appliance:
- Turn the appliance off, using
the on/off switch
- Unplug the appliance from the
mains
- Clean the appliance
- Put on the protective cover.
Cleaning:
- Disconnect the appliance from
the mains and allow it to cool
before undertaking any cleaning
task.
- Clean the equipment with a
damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or pro-
ducts with an acid or base pH
such as bleach, or abrasive pro-
ducts, for cleaning the appliance
- Never submerge the appliance