Resetting To Factory Settings; Updating The Software - PURE Evoke H3 Benutzerhandbuch

2. Press the Select buttons to choose 'Settings'.
Press the Select buttons to choose 'Language'.
3.
4. Press the Select buttons to choose a language.

Resetting to factory settings

A factory reset removes all stored presets, alarms, timers and settings on your Evoke H3.
Note: You cannot undo a factory reset.
To reset to factory settings:
1. Press .
Press the Select buttons to choose 'Settings'.
2.
3. Press the Select buttons to choose 'Factory Reset'.
Press the Select buttons to choose 'Yes'.
4.
Your Evoke H3 resets to factory settings and then restarts.

Updating the software

Pure may provide software updates to your Evoke H3. To check for available software updates, visit
support.pure.com.
Tip: To be contacted when software updates are available, you can register your product at pure.com/
register.
To check the current software version:
1. Press .
Press the Select buttons to choose 'Settings'.
2.
3. Press the Select buttons to choose 'Software Version'.
To update the software:
1. Use a Micro USB cable to connect your Evoke H3 to your computer.
2. Follow the instructions provided with the software update file.
EN
19