Maintenance - Absaar SL60 Benutzerhandbuch

- Carefully read through the instructions relating to the motor, as listed by the manufacturer.
- Position the main switch on "I"
- You may start the vehicle.
IMPORTANT NOTE: DO NOT EXCEED 3 SECONDS IN ONE ATTEMPT TO START, wait for 120 seconds
between each attempt. You may attempt no more than 5 times. After 5 attempts, let the charger cool
down for 10 minutes before trying again.

5. MAINTENANCE

- Regular repair and maintenance ensures proper use in a manner consistent with the safety requirements.
- Improper or incorrect procedure can cause damage to the charger.
- The warranty period is 2 years from the date of invoice. For any defect, bring the charger to your authorised dealer.
The original invoice must be presented to claim benefits from the said warranty.
- Before commencing any maintenance work, the operator must without fail disconnect the charger from the power
outlet.
- If the transformer overheats, it is protected by an internal thermal protection device which cuts the charger
outputs. In this case, the transformer must be allowed to cool down before the user resumes charging.
33
UK