Safety Regulations - Absaar SL60 Benutzerhandbuch

IP20
Disconnect the 220V power outlet before plugging in or unplugging the battery clamps.
IMPORTANT: Explosive gas, always place away from flames, sparks or incandescent bodies and
always ensure that the area is well-ventilated when charging the batteries.
Table listing the charging power depending on the position of the switches for SL60:
Position of the load
button
Position of the load
button

3. SAFETY REGULATIONS

For the safety of people and property, the following safety guidelines must be observed when using the charger.
1/ To allow for the flammable gases generated at the time of charging, the battery must be charged inside a room
with good ventilation. The product should be kept away from any flame or spark. Please DO NOT smoke when the
charger is in use.
2/ In accordance with the IP20 rating, the product must not be used outside in rain or snow.
3/ Always use grounded power of 220V.
4/ At the time of charging, chargers must always be placed on a flat and not tilted ground.
AB-SLS60
SLS60
RATED INPUT
INTENSITY
VOLTAGE
2.6/5.8A
230V/50Hz
MIN + 1
MIN + 2
BOOST+1
BOOST+2
MIN + 1
MIN + 2
BOOST+1
BOOST+2
EN60335-2-29
BATTERY Max 900Ah Min 140Ah
I 60A I
boost
START: 320A 3S ON 120S OFF
FUSE VOLTAGE
30A 12/24V
Output voltage (V)
12
12
12
12
24
24
24
24
27
20A
min
RATED OUTPUT
INTENSITY FUSE
30/35A 5X80A
Load current [A]
20A
30A
42A
60A
20A
35A
47A
60A
UK