Technical Parameters - Absaar SL60 Benutzerhandbuch

1. INTRODUCTION TO THE PRODUCTS
◆ Start-assist auxiliaries fitted with lead batteries can be used for charging and starting-up cars, motorcycles and
boats.
◆ Fitted with an input and output fuse and a ground wire connected to the power cable, these chargers are safe
and reliable.
◆ Charger switches / starting assistance, adjustable charging power, fully functional.
◆ Fitted with two wheels and a handle for easy movement in the workshop.
◆ Rack for arranging the cable
◆ Timer (available only on model SLS60)
◆ Suitable for 12V and 24V vehicles.
◆ Product designed for professional use.
◆ Ammeter to display the current absorbed by the battery in real time as well as after charging.
◆ Not suitable for Gel and Calcium batteries.
◆ Standard non-automatic chargers.

2. TECHNICAL PARAMETERS

IP20
Disconnect the 220V power outlet before plugging in or unplugging the battery clamps.
IMPORTANT: Explosive gas, always place away from flames, sparks or incandescent bodies and
always ensure that the area is well-ventilated when charging the batteries.
AB-SL30
SL30
RATED INPUT
INTENSITY
VOLTAGE
2.1/3.9A
230V/50Hz
EN60335-2-29
BATTERY Max 450Ah Min 80Ah
I 30A I
boost
START: 170A 3 Second ON / 120 Second OFF
IP20
25
15A
min
RATED OUTPUT
INTENSITY
VOLTAGE
2.1/3.9A
230V/50Hz
UK