Aim-TTI TGF3162 Kurzanleitung Seite 13

Set the Pulse Width
•
Press the soft-key labelled Duty - the key label changes to Width and displays the width as
a time
•
Use the numeric keypad to enter a new width. Press the numbers 3 0.
Note that, as soon as a number is entered, the soft-keys change to show units of time.
•
Press the soft-key labelled ns to confirm a width of 30ns.
Set the Pulse Edge Times
•
Press the soft-key labelled Edge to open the pulse edge sub-menu.
•
Use the cursor keys to select the digit representing units of 10ns
•
Use the spin wheel to change the value to 20.0ns
Note that the value could have been entered using the numeric keypad if preferred.
12