Aim-TTI TGF3162 Kurzanleitung Seite 124

Inputs
Trigger / Count (DC) Input
For ASK, FSK, BPSK, triggered sweep, gated burst, triggered burst and DC coupled external
frequency measurement.
Frequency Range:
Signal Range:
Minimum Pulse Width
(Trigger Input):
Polarity (Trigger Inpput): Selectable as high/rising edge or low/falling edge.
Input Impedance:
External Modulation Input
For AM, FM, PM, SUM and PWM
Voltage Range:
Input Impedance:
Bandwidth:
Ref Clock / Count (AC) Input
Input for an external 10MHz reference clock and AC coupled external frequency measurement.
Voltage Range:
Maximum Voltage:
Minimum Voltage:
Interfaces
Full digital remote control facilities are available through LAN, USB and optional GPIB interfaces.
LAN Interface
USB Interface
USB Flash Drive
GPIB (optional)
Trigger Input DC – 1MHz
Counter Input 100mHz to >125MHz
Threshold typically 1.2V;
Sensitivity 100mVpp (≤50MHz), 250mVpp (>50MHz)
Maximum input +5V / -1V.
50ns
10kΩ
± 2.5V full scale
5kΩ typical
DC to 5MHz
≤50MHz
100mVpp – 5Vpp
>50MHz 250mVpp – 5Vpp
+10V
-10V
Ethernet 100/10base – T hardware connection. 1.4 LXI Core 2011
Standard USB 2.0 hardware connection. Implemented as virtual-COM
port.
For waveform and set-up storage/recall.
Conforming with IEEE488.1 and IEEE488.2
123