Aim-TTI TGF3162 Kurzanleitung Seite 118

Noise
Gaussian White Noise: Noise can also be used as modulating waveform.
Bandwidth (-3dB):
Noise crest factor
(Vp/Vrms):
Output Level:
PRBS (only available in TGF3082 with Option GU3082)
Bit Rate:
Sequence Length:
Rise and Fall Times
(Typical):
Output Level:
Harmonic Output (only available in TGF3082 with Option GU3082)
Harmonic waveforms can be defined and stored in user-defined arbitrary waveform locations.
Frequency Range:
Frequency Resolution:
Harmonic Order:
Harmonic Amplitude:
Harmonic Phase:
Output Level:
Internal Frequency Reference
Initial Setting Error:
Oscillator Ageing Rate:
Temperature Stability:
Modulation
AM (Amplitude Modulation) Normal & Suppressed Carrier
Carrier Waveforms:
Maximum Carrier
Frequency:
Modulation Source:
Internal Modulating
Waveforms:
Internal Modulating
Frequency:
Amplitude Depth:
100MHz [62.5MHz]
5.16 [6.4]
10mVp-p to 10Vpp into 50Ω
1µbps to 50Mbps [1µbps to 25Mbps], 1µbps resolution
m
2 – 1, where m = 7, 9, 11, 15, 20, 23, 29 or 31
5ns Fixed [10ns Fixed]
10mVp-p to 10Vpp into 50Ω
1µHz to 80MHz [1µHz to 40MHz]
1µHz, 14 digits
1 to 50, Up to 16 different harmonics order can be defined
0.0% to 100.0% of output amplitude, 0.1% resolution
-360.0 to +360.0 degrees, 0.1 degree resolution
≤ 50MHz
10mVp-p to 10Vp−p into 50Ω
≤ 80MHz
10mVp-p to 5Vp-p into 50Ω
<± 1ppm
<± 1ppm first year
<1ppm over the specified temperature range
Sine, Square, Ramp, Pulse, Noise, PRBS (only available in TGF3082
with Option GU3082), Arb
50MHz [25MHz], subject to carrier waveform.
Internal/External
Sine, Square, Positive Ramp, Negative Ramp, Triangle, Gaussian
Noise, DC, Sinc, Exponential Rise, Exponential Fall, Logarithmic Rise,
Logarithmic Fall, Haversine, Gaussian, Lorentz, D-Lorentz, Cardiac,
PRBS-PN7, PN9, PN11, PN15, PN20, PN23, PN29, PN31 and User
Defined Arbs (PRBS waveforms only available in TGF3082 with Option
GU3082).
1µHz to 10MHz, 1µHz resolution
0.00% to 100.00%, 0.01% resolution
117