Aim-TTI TGF3162 Kurzanleitung Seite 122

Characteristics
Relative phase:
Channel to channel
Skew (typical):
Crosstalk (typical):
External Frequency Measurement
Function:
Frequency Range:
Source:
Frequency Resolutuion:
Measurement Time:
Input Range and
Sensitivity:
Hysteresis:
Accuracy:
Timebase Accuracy:
Outputs
Main Outputs
Output Impedance:
Amplitude:
Amplitude Accuracy:
DC Offset Range:
DC Offset Accuracy:
Resolution:
-360.000 to 360.000 degrees, 0.001 degree resolution (Phase offset
cannot be set for Noise)
<1ns (when performing identical operations)
<-80db
Frequency, Period, Positive Width, Negative Width, Duty Cycle
AC coupled 3Hz to >125MHz
DC coupled 100mHz to >125MHz
AC coupled REF / COUNT (AC) IN
DC coupled TRIG / COUNT (DC) IN
Up to 7 digits displayed.
Automatic
≤50MHz
AC coupled
>50MHz
Maximum input ±10V
DC coupled Threshold typically 1.2V;
Sensitivity 100mVpp (≤50MHz), 250mVpp (<50MHz)
maximum input +5V, -1V
Input hysteresis 10mV
voltage
±1 digit ± timebase accuracy.
<± 1ppm initial settling error, <± 1ppm oscillator ageing rate in the first
year, <1ppm over the specified temperature range
50Ω
≤ 50MHz
20mV to 20Vp−p open circuit (10mV to 10Vp−p into 50Ω)
≤ 100MHz
20mV to 10Vp−p open circuit (10mV to 5Vp−p into 50Ω)
≤ 160MHz
20mV to 5Vp−p open circuit (10mV to 2.5Vp−p into 50Ω)
Amplitude can be specified open circuit (hi Z) or into an assumed load of
1Ω to 10kΩ in Vpp.
1.5% ±5mV at 1kHz into 50Ω
±10V. DC offset plus signal peak limited to ±10V from 50Ω.
Typically 1% ±50mV.
3 digits or 1mV for both Amplitude and DC Offset.
100mVpp - 5Vpp
250mVpp - 5Vpp
121