Belkin OmniView PRO2 Benutzerhandbuch Seite 23

Using the Console
With a daisy-chain switch configuration, you can switch between BANKs (KVM
switches) by pressing "Scroll Lock", "Scroll Lock", "Page Up", to switch to the next
BANK. Press "Scroll Lock", "Scroll Lock", "Page Down", to switch to the previous
BANK.
Switch to next BANK Switch to previous BANK
With a daisy-chain switch configuration, you can switch directly to any port on any
BANK by pressing "Scroll Lock", "Scroll Lock", BANK address, and the port number.
For example, if you press "Scroll Lock", "Scroll Lock", "03","05", the server on BANK
03, port 05 will become active.
Switch to BANK 03, port 05
Note: You will have approximately five seconds to complete each hot-key
sequence.
23