Belkin OmniView PRO2 Benutzerhandbuch Seite 14

Installation
1.3
Mount the Console to your rack or enclosure. (Refer to diagram below.)
1.4
Attach the power cable to the back of the Console and connect to a power
source. Do not power up the Console at this time. (Refer to diagram below.)
Your Console is now mounted securely to the rack and you are ready
to connect your servers.
�������
�� �����
FLASH
������ �����
������� ��� �����
50~60Hz
���� ����� ���� ����� ���� �����
���� ����� ���� ����� ���� �����
1
2
3
4
5
6
7
���� �����
���� �����
8
14