Private Branch Exchanges / Supplementary Services; Dialling Pause - AUDIOLINE TEL 50 SOS Bedienungsanleitung

Private Branch Exchanges / Supplementary Services

6 Private Branch Exchanges / Supplementary Services
R button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transferring calls
and automatic call back can be used via the R button. Please refer to the operating manual
supplied with your private branch exchange to determine which recall (Flash) time must be set
in order to use these functions. The dealer where you purchased the exchange can provide in-
formation as to whether the telephone will work properly with the exchange. Setting the recall
time . Page 33

Dialling pause

In the case of private branch exchanges, it is necessary to enter an access code to get an out-
side line with its corresponding dialling tone. When using some older private branch ex-
changes, it takes a little time before the dialling tone becomes audible. Particularly in the case
of such private branch exchanges, it is possible to insert a dialling pause after the number for
the outside line so that the number can be dialled in a continuous process without having to
wait for the dialling tone.
£
After dialling the number for the outside line, the telephone then waits approx. 3 seconds be-
fore dialling the actual phone number.
R button and supplementary services
Your telephone supports the supplementary services offered by your telephone network pro-
vider, such as brokering, call waiting and conference calls. The supplementary services can
be used in conjunction with the R button. Please contact your telephone network provider re-
garding which recall time must be set to use the supplementary services. Please contact the
telephone network provider with regard to enabling the supplementary services. Setting the re-
call time . Page 33.
Caller number display (CLIP
If this function is available with your telephone line, the number of the caller appears in the dis-
play when the phone rings. If the caller has suppressed transmission of his phone number, a
corresponding message appears in the display. The phone number is not displayed and, as a
result, is not stored in the calls list.
1
CLIP: Calling Line Identification Presentation
32
The pause can also be entered with the phone number in the phone book.
1
10
)
The caller number display function is an optional service offered by telephone network
providers. Contact your network provider for further information.
Insert a dialling pause