Velleman CCTVPROM15 Schnelleinstieg Seite 11

Quick menu bar
Note: only available when USB mouse is connected.
Move the pointer towards the left of the monitor to open the quick menu bar:
Open channel switch panel.
Show playback control panel.
Zoom-in mode (select desired channel first before entering zoom-mode).
Select audio channel (live mode only live channels can be selected).
Enter PTZ mode and show PTZ control panel
Click to show the power off panel to either halt or reboot the system.
Recording
•
Check whether the camera or cameras are properly connected.
•
When the auto-recording and pre-alarm functions are enabled, the device will start recording images.
•
Default the recording icon (
•
In case the motion or alarm detection is activated and a motion or alarm is detected, the motion (
alarm ( ) icon is shown.
•
When timed recording is enabled, the timed recording icon (
is on.
•
Default, the device is in HDD overwrite mode and the icon (
Play-back
Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick menu
bar to open the playback control panel:
A progress bar
B playback control
C event search
Note: play-back needs at least 8192 recorded images to work properly (e.g. with images per second set to 30,
the recording must be at least 273 seconds long).
•
The fast forward (
Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).
•
Press the pause button (
•
Press the stop button (
•
Press the SLOW button once to set play-back speed to 1/4
V. 1.0 – 07/12/2012
CCTVPROM15
) is shown.
D
E
F
) and fast rewind ( ) buttons will increase resp. decrease the play-back speed.
) to temporary suspend video play-back.
) to return to live monitoring.
) is shown and the timed recording LED
) is shown.
information
close
set repeat function A→B / open backup menu
th
and twice for 1/8
11
) resp.
th
.
©Velleman nv