Connecting To Network - HDigit FM / Internet Radio with Audio Media Streaming and AUX IN Bedienungsanleitung

Orbiter
English

Connecting to Network

Step 1 - Power up Radio
Firstly, connect your Internet Radio adapter and ensure the
Power LED lights up. In use, the Radio can be
→
switched on or off by pressing .
Step 2 – Access to Network
In some cases, it may find more than one network. Rotate the Scroll knob to cycle through the name
list, press this knob when the name of your favor network is displayed.
If your network is not configured to request a password (WEP/WPA), the radio will connect to the
network and display:
If a WEP/WPA key (password) is required, the Radio will display the following:
Rotate the Scroll knob to your favour Router, press to confirm.
Your radio will ask you to input the WEP/WPA code and display the password entry screen.
a. Rotate the Scroll knob to cycle through the alphanumeric character list, when your desired charac-
ter is displayed, press this knob to select and then choose the next character.
Note: if your password is a serial of number, turning the Scroll knob counterclockwise is a shortcut to
select it.
9