Shift To Wired Network; Shift To Wireless Network - HDigit Sense Bedienungsanleitung

English

2.2 Shift to Wired Network

Note: Make sure the LAN cable is already connected to the LAN.
To enter the LAN Setting, select Screen Menu → Settings
Settings > → < Add Wired Network > → < DHCP enable > → <Waiting for Ethernet.> later, it will say connected.
If your radio failed to access the network, please do the following:
a. Check your Router to see if it is working normally or not.
b. Check your LAN cable and make sure it isn't damaged,
c. Make sure the cable which is inserted into the LAN socket is tight

2.3 Shift to Wireless Network

→ Note: to make this order work, you can either do a 'factory reset' , or follow the steps below
Select Screen Menu → Settings → < Network Settings
< Add Wireless Network > → < DHCP Yes >, and then step by step to access the wireless network
> → < Network Settings > → < Manual
>→ < Manual Settings > →
16