Shift To Wired Network - HDigit FM / Internet Radio with Audio Media Streaming and AUX IN Bedienungsanleitung

English
b. If you find the wrong character has being input, press BACK to return to that character.
c. After the input is done, when the cursor points to , press the Scroll knob to try accessing
the Internet.
It should now successfully connect to your network.
Note: a. WEP/WPA pass codes are case-sensitive.
b. Radio will automatically save the WEP/WPA code, therefore, there is no need to re-enter unless you
perform a <Reset to Default>.
Or, if it fails to access, please do the following:
A. Check your Router, see if it is working normally or not.
B. Relocating your radio to a stronger signal position is highly recommended!
C. Make sure your password is input correctly.

Shift to Wired Network

Step 1 – Choose LAN Setting
Note: make sure the LAN cable is already connected to the LAN socket.
→ → →
• To enter the LAN Setting, press MENU < Configuration > < Network > < Manual Configuration >
→ → →
< Wired > < DHCP (On) > Connecting to Network..., after that, it will say connected.
10