Select A Preset; Aux Mode - HDigit FM / Internet Radio with Audio Media Streaming and AUX IN Bedienungsanleitung

English
Station Preset
Note: your radio can also provide you with 5 preset stations.
To store the current station:
While playing your desired FM program, press and hold one of the PRESET 1-5 for 2 sec., until the preset number shows up in front of
frequency.

Select a Preset

1. If it isn't in FM mode, press MODE to convert to it.
2. Press the relevant PRESET 1-5 for your favorite, in order to avoid overwriting current station, make sure you do not hold the relevant
PRESET 1-5 down.
How to perform Audio Setting?
P By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise ratio (hiss).
P To play weak stations in mono, follow below steps:
→ → →
1. Press MENU < Configuration > < FM Setup > < Mode >, press it to confirm.
2. Turn the SCROLL knob to < Set Mono >, press it to confirm.

AUX Mode

1. It can be activated by pressing MODE repeatedly until <AUX> is displayed, stop pressing.
2. Connect one end of the audio cable to the headphone (or auxiliary out) socket of your
source device, connect the other end to AUX IN socket on the rear of your radio.
3. To gain optimal volume levels, adjusting the output volume level on both the source device and radio itself is
recommended. Then your radio will transform into a high quality digital audio speaker system.
Note: AUX enables quick and easy connection to an MP3 player or other external sound sources.
18