Herunterladen Inhalt Inhalt Diese Seite drucken

Nikko Air RACE VISION 220 FPV Bedienungsanleitung Seite 3

Inhaltsverzeichnis

Werbung

CHARGING THE DRONE • CHARGING THE DRONE • CHARGING THE DRONE •
CHARGING THE DRONE • CHARGING THE DRONE • CHARGING THE DRONE •
CHARGING THE DRONE • CHARGING THE DRONE •
1
MAX.
5V 2.4A
GB Caution! Make sure the drone is switched to the o position (O)
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
Caution! Make sure the drone is switched to the o position (O)
FR
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
Caution! Make sure the drone is switched to the o position (O)
DE
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
Caution! Make sure the drone is switched to the o position (O)
ES
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
• The toy is only to be connected to Class II equipment.
• Ce jouet ne doit être raccordé qu'à un appareil de
classe II.
• Das Spielzeug darf nur an Geräte der Klasse II
angeschlossen werden.
• El juguete sólo debe ser conectado al equipo de Clase II.
2
60-180
60-180
mins.
Caution! Make sure the drone is switched to the o position (O)
IT
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
Caution! Make sure the drone is switched to the o position (O)
PT
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
Caution! Make sure the drone is switched to the o position (O)
NL
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
Caution! Make sure the drone is switched to the o position (O)
PL
before charging.
1. Plug the USB cord into computer or USB power block (Max 5V 2.4 A).
2. Insert the charging port to drone.
Red light = charging
No light = charged
3. Once charged disconnect charging cord from the drone and power source.
Charging precautions
• After use allow drone to cool down to room temperature before charging.
• After charging battery pack will feel warm, this is normal.
• Il giocattolo deve essere collegato solo ad un impianto
di Classe II.
• O brinquedo só deve ser ligado a equipamento de
Classe II.
• Het speelgoed mag alleen worden aangesloten op klasse
II apparatuur.
• Zabawkę należy podłączać wyłącznie do urządzeń
Klasy II.
3
3

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Nikko Air RACE VISION 220 FPV

Inhaltsverzeichnis