Inhaltsverzeichnis
Werbung
USING FPV SCREEN • USING FPV SCREEN • USING FPV SCREEN • USING FPV SCREEN •
USING FPV SCREEN • USING FPV SCREEN • USING FPV SCREEN • USING FPV SCREEN
PICTURES & VIDEO • PICTURES & VIDEO • PICTURES & VIDEO • PICTURES & VIDEO • PICTURES & VIDEO • PICTURES & VIDEO •
PICTURES & VIDEO • PICTURES & VIDEO
• Press 1 for picture.
GB
• Press and hold for 3 seconds to record video. Press button again to end recording.
• Press 1 for picture.
FR
• Press and hold for 3 seconds to record video. Press button again to end recording.
• Press 1 for picture.
DE
• Press and hold for 3 seconds to record video. Press button again to end recording.
• Press 1 for picture.
ES
• Press and hold for 3 seconds to record video. Press button again to end recording.
VIDEO CHANNEL • VIDEO CHANNEL • VIDEO CHANNEL • VIDEO CHANNEL • VIDEO CHANNEL • VIDEO CHANNEL • VIDEO CHANNEL •
VIDEO CHANNEL
• There are multiple channels to allow multiple pilots to fly at once.
GB
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
• There are multiple channels to allow multiple pilots to fly at once.
FR
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
• There are multiple channels to allow multiple pilots to fly at once.
DE
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
• There are multiple channels to allow multiple pilots to fly at once.
ES
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
1.
x1
x1
ON/OFF • ON/OFF • ON/OFF • ON/OFF • ON/OFF • ON/OFF • ON/OFF •
ON/OFF
GB
Push power button: to turn on or to turn off.
1.5V
1.2V
FR
Push power button: to turn on or to turn off.
DE
Push power button: to turn on or to turn off.
ES
Push power button: to turn on or to turn off.
GB
Adjust the brightness and contrast of the screen
using the + -.
Adjust the brightness and contrast of the screen
FR
using the + -.
Adjust the brightness and contrast of the screen
DE
using the + -.
Adjust the brightness and contrast of the screen
ES
using the + -.
x 3
x 4
x 5
x 6
ADJUST DISPLAY • ADJUST DISPLAY • ADJUST DISPLAY • ADJUST DISPLAY •
ADJUST DISPLAY • ADJUST DISPLAY • ADJUST DISPLAY • ADJUST DISPLAY
IT
• Press 1 for picture.
• Press and hold for 3 seconds to record video. Press button again to end recording.
• Press 1 for picture.
PT
• Press and hold for 3 seconds to record video. Press button again to end recording.
• Press 1 for picture.
NL
• Press and hold for 3 seconds to record video. Press button again to end recording.
• Press 1 for picture.
PL
• Press and hold for 3 seconds to record video. Press button again to end recording.
IT
• There are multiple channels to allow multiple pilots to fly at once.
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
PT
• There are multiple channels to allow multiple pilots to fly at once.
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
NL
• There are multiple channels to allow multiple pilots to fly at once.
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
PL
• There are multiple channels to allow multiple pilots to fly at once.
• Each channel has a different color that illuminates the rear light of the drone.
• Channel selection must be made before flight.
1. Press the "B" on the controller to select a channel.
2. Press the video channel button until you see image on screen and/or the color
dot in the FPV screen matches the LED on the drone.
3
3
5732MHz
4
4
5769MHz
5
5
5806MHz
6
6
5843MHz
10
IT
Push power button: to turn on or to turn off.
PT
Push power button: to turn on or to turn off.
NL
Push power button: to turn on or to turn off.
PL
Push power button: to turn on or to turn off.
IT
Adjust the brightness and contrast of the screen
using the + -.
Adjust the brightness and contrast of the screen
PT
using the + -.
Adjust the brightness and contrast of the screen
NL
using the + -.
Adjust the brightness and contrast of the screen
PL
using the + -.
2.
x1
x1
Werbung
Inhaltsverzeichnis
