Nikko Air RACE VISION 220 FPV Bedienungsanleitung Seite 14

ADJUSTING THE TRIM • ADJUSTING THE TRIM • ADJUSTING THE TRIM •
ADJUSTING THE TRIM • ADJUSTING THE TRIM • ADJUSTING THE TRIM •
ADJUSTING THE TRIM • ADJUSTING THE TRIM
1
GB
You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
FR You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
DE
You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
ES
You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
A
x1 x1
2
3
x1 x1
IT
You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
PT You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
NL
You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
PL
You may notice a "pull" in one direction when flying, this is known as drift. You
may need to adjust the trim to ensure best performance and eliminate drift.
1. With the drone on the ground and the throttle stick (left stick) set to lowest
position, press A to enter trim mode.
2. Quickly push the right stick in the opposite direction from the drift direction
and let it set back to the center.
3. Push A again to exit trim mode.
Do a test flight. If the drone still drifts, repeat steps 1 to 3.
NOTE
Adjust trim when the drone is landed not while flying.
14
A