Nikko Air RACE VISION 220 FPV Bedienungsanleitung Seite 18

PROBLEM
The drone is unresponsive
The FPV screen only shows static
Blades spin but drone doesn't y
properly
PROBLEM
The drone is unresponsive
The FPV screen only shows static
Blades spin but drone doesn't y
properly
PROBLEM
The drone is unresponsive
The FPV screen only shows static
Blades spin but drone doesn't y
properly
PROBLEM
The drone is unresponsive
The FPV screen only shows static
Blades spin but drone doesn't y
properly
PROBLEM
The drone is unresponsive
The FPV screen only shows static
Blades spin but drone doesn't y
properly
SOLUTION
• Make sure the battery is fully charged and power is on.
• Drone may be disarmed. Follow the syncing instructions to ensure the
controller is paired with drone.
• Make sure the drone and screen are on the same video channel.
• Drone blades may have been installed incorrectly. Make sure the correct
blade "A" or "B" was installed in the correct position.
SOLUTION
• Make sure the battery is fully charged and power is on.
• Drone may be disarmed. Follow the syncing instructions to ensure the
controller is paired with drone.
• Make sure the drone and screen are on the same video channel.
• Drone blades may have been installed incorrectly. Make sure the correct
blade "A" or "B" was installed in the correct position.
SOLUTION
• Make sure the battery is fully charged and power is on.
• Drone may be disarmed. Follow the syncing instructions to ensure the
controller is paired with drone.
• Make sure the drone and screen are on the same video channel.
• Drone blades may have been installed incorrectly. Make sure the correct
blade "A" or "B" was installed in the correct position.
SOLUTION
• Make sure the battery is fully charged and power is on.
• Drone may be disarmed. Follow the syncing instructions to ensure the
controller is paired with drone.
• Make sure the drone and screen are on the same video channel.
• Drone blades may have been installed incorrectly. Make sure the correct
blade "A" or "B" was installed in the correct position.
SOLUTION
• Make sure the battery is fully charged and power is on.
• Drone may be disarmed. Follow the syncing instructions to ensure the
controller is paired with drone.
• Make sure the drone and screen are on the same video channel.
• Drone blades may have been installed incorrectly. Make sure the correct
blade "A" or "B" was installed in the correct position.
18