Motorola IHF1000 Hier Beginnen Seite 29

BTHandsfree_multi.book Page 27 Tuesday, July 12, 2005 8:46 AM
Action
2 When prompted, say "Phone voice tag [Phone
Voice Name]."
Note: The voice tag must already be stored in the
phone.
The system responds: Phone voice tag please,[Phone voice
name, please.]
3 Say "<voice tag>" (where <voice tag> is a voice tag
stored in the phone).
The system calls the number associated with the
phone voice tag [phone voice name].
Using the Speed Dial Command
Action
1 Press the TALK button.
2 When prompted, say "Speed Dial."
The system responds: Speed dial number, please.
3 Recite the speed dial number.
The system repeats the number it heard and asks:
Is this correct?
4 If the number recited is correct, say "Yes."
The system responds: Dialing, and places the call.
Note: Speak speed dial numbers as continuous digits. For
example, dictate speed dial location 22 as "2-2", not
"twenty-two."
27