Motorola IHF1000 Hier Beginnen Seite 22

BTHandsfree_multi.book Page 20 Tuesday, July 12, 2005 8:46 AM
Initial Pairing
Note: Use this procedure ONLY if there are no handsets
paired to the system.
With the car kit and phone in close proximity:
Action
1 Press the TALK button.
2 When prompted, say "Pair Phone."
The system responds: Set your phone in scan mode and
enter 1234 when prompted for the passcode.
3 When the phone displays the device name, select
the device.
The phone displays the passcode entry screen.
4 Enter the passkey (1234).
The phone displays "PIN verified," and the system
says: Pairing complete. Connection in progress.
Note: Some phones ask you to accept the BT link.
Enter Yes.
Upon successful completion, the system says:
Connection is complete. Phone < n> ready for use.
20