Equipment Description; Led Indicators - AKO -52042 Bedienungsanleitung

4.- Equipment description

External antenna
Reset button
Loading battery LED
Operation LED
Active digital
input LEDs
Battery
Mini-USB connector
for SOFTGSM

4.1.- LED indicators

Coverage LED (Green)
Flash every 3 sec.: Correct operation, good
Ÿ
GSM coverage.
Intermittent: No GSM network due to no SIM
Ÿ
card, lack of coverage, SIM with PIN activated
or antenna disconnected.
Power supply LED (Red)
ON: Power supply 230 V.
Ÿ
OFF: No power supply.
Ÿ
Loading battery LED (Red)
ON: Battery loading
Ÿ
OFF: Battery loaded or not connected
Ÿ
If the electrical supply fails (while operating on battery power), only the LEDs for coverage and in digital
input status will remain active.
Operation LED (Green)
ON: Alarm in operation. 230 V power supply or
Ÿ
on battery power.
OFF: Alarm off, no power supply and no battery
Ÿ
(disconnected or low).
Relay 1 or 2 active LED (Red)
ON: Relay 1 or 2 activated.
Ÿ
OFF: Relay 1 or 2 in standby.
Ÿ
Active digital input LEDs
ON: Digital Input Active
Ÿ
OFF: Digital Input Inactive
Ÿ
14
Anti-condensation valve
SIM card slot
Battery connector
Relay 1 LED
Relay 2 LED
Power supply LED
Coverage LED