SMA FLX Serie Installationsanleitung Seite 9

Troubleshooting
3 Troubleshooting
If a sensor is not detected:
1. Confirm that the option is correctly installed, see
section 2.1.1 Verification via Display.
2. Go to the inverter equipped with the sensor
3 3 interface option. Normally this is the master
inverter.
3. Find the event ID reported by the inverter
•
•
4. Refer to the event list in the User Guide for
explanation of error codes and recommended
action.
8
In the display, go to [Log → Event Log].
Find the event ID under [Latest event]
or [Last 20 events]
In the web interface, go to [Inverter
level: Log → Event Log].
Find the event ID under [EventId].
L00410607-02_2q / Rev. date: 2014-06-20