For LM 40 PP:
Your mower is equipped with a central height adjustment lever offering 5 height positions. The height
(the blade to the ground) can be adjusted from 25 mm to 75 mm (5 height positions). (Fig.10C)
1.
Stop mower and disconnect spark plug wire before changing mower cutting height.
2.
The central height adjustment lever offers you 5 different height positions.
To change the height of cut, squeeze adjuster lever from the rack toward the wheel, move up or
down to selected height and secure it to rack again.
7. CLEANING
WARNING: Before performing any maintenance, shut off the engine, wait for stopping the
movement of all rotating parts and disconnect the spark plug wire.
The underside of the mower deck should be cleaned after each use to prevent a buildup of grass
clippings, leaves, dirt or other impurities. If this debris is allowed to accumulate, it will invite rust and
corrosion and problems with the passage of cut grass through mower deck.
Important! Do not use water for cleaning. Water can damage the engine or contaminate fuel system.
1. Wipe mower deck and engine with a dry cloth and then get rid of dust and dirt.
2. Tilt the mower so that the spark plug is at the top, and bottom of the deck clean with a spatula or a
piece of wood.
8. LUBRICATION INSTRUCTIONS
WARNING: Before performing any maintenance, shut off the engine, wait for stopping the
movement of all rotating parts and disconnect the spark plug wire.
1. WHEELS - Lubricate the ball bearings in each wheel at least once a season with a light oil.
2. ENGINE - Follow engine manual supplied with this mower for lubrication instructions.
Fig. 10C
59