5. ASSEMBLY
5.1 FOLDING HANDLE
For model LM 40 PP and LM 40 PSP:
1. Insert the lower handlebars into the fixed holes of the unit body, and then fixed with supplied screw
by screwdriver. (Fig.2A/ Fig.2B)
2. Release the upper handlebars for folding.
3. Connect the upper handle and the lower handle with the locking knobs. (Fig.2C/ Fig.2D)
4. Attach the cable-clamp to the position shown and then attach the cable. (Fig. 2E/ Fig.2F)
Fig. 2A
Fig. 2D
For model LM 41 EP:
1. Fix the lower handlebars into the unit body with a suitable spanner. (Fig.2G)
2. Release the upper handlebars for folding. (Fig.2H)
3. Connect the upper handle and the lower handle with the locking knobs. (Fig.2H)
4. Attach the cable-clamp to the position shown and then attach the cable. (Fig.2I)
Fig. 2G
Fig. 2B
Cable
clamp
Fig. 2E
Fig. 2H
53
Fig. 2C
Cable
clamp
Fig. 2F
Cable
clamp
Fig. 2I