Maintenance and storage
Keep all nuts, bolts and screws tight to be sure the equipment are in safe working condition.
Never store the equipment with petrol in the tank inside a building where fumes can reach an open
flame or spark.
Allow the engine to cool before storing in any enclosure. Clean and maintain the lawnmower
before storage.
To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area
free of grass, leaves, or excessive grease.
Check the grass catcher frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors.
Improper maintenance, use of non-conforming replacement components, or the removal or
modification of safety components can damage the lawnmower and injure the operators seriously.
Only use the recommended blades and spare parts by the manufacturer. The use of non-genuine
parts can damage the machine and injure the operators. Keep the lawnmower in good working
condition.
If the blade stopping device doesn't work, do not use your mower and
Contact authorized service center or your local dealer.
WARNING: Do not touch rotating blade.
WARNING: Refuel in a well-ventilated area with the engine stopped. Stop engine and allow
to cool it for at least 2 minutes before refueling.
50
make repairs before
use.