Temperature Setting; Mode Settings - Hotpoint SXBHAE 924 WD Gebrauchsanweisung

Temperature setting

Important note: The display will only be illuminated when a button is pressed or a compartment
door opened, at all other times the display will be in a standby state.
Important note: The control panel will automatically lock itself. Before adjusting the temperature or
selecting any mode the panel must be unlocked by pressing and holding the lock button for 3 seconds
until the lock symbol disappears from the display.
Note: The standard operating temperature for the fridge compartment should be between 0°C and
4°Cand the standard operating temperature for the freezer compartment should be between -18°C
and -25°C.
Note: The temperature of the freshly stored food and how often the door is opened affects the
temperature in the refrigerator compartment. If required, change the temperature setting.
Freezer compartment temperature adjustment
To change the temperature of the freezer compartment, press the freezer temperature adjustment button.
The temperature of the freezer can be set between -16°C and -24°C.
Press the freezer temperature adjustment button until the required temperature is shown on the display.
Please note that during the temperature setting process the freezer temperature on the display will flash.
Once the required temperature is set the freezer temperature will flash for a few seconds, the display will
be automatically locked and then after approximately 30 seconds the display will disappear.
Freezer compartment temperature
The freezer compartment temperature will be shown on the display when a compartment door is opened
or a button is pressed.
Fridge compartment temperature adjustment
To change the temperature of the fridge compartment, press the fridge temperature adjustment button.
The temperature of the fridge can be set between 2°Cand 8°C.
Press the fridge temperature adjustment button until the required temperature is shown on the display.
Please note that during the temperature setting process the fridge temperature on the display will flash.
Once the required temperature is set the fridge temperature will flash for a few seconds, the display will be
automatically locked and then after approximately 30 seconds the display will disappear.
Fridge compartment temperature
The fridge compartment temperature will be shown on the display when a compartment door is opened or
a button is pressed.

Mode settings

The appliance has 4 pre-set modes that can be selected by pressing the mode button and these are:
• Vacation (holiday)
• Quick freeze
• Quick freeze and cool
• Quick cool
Vacation mode (holiday mode)
This mode is designed to prevent your appliance from wasting energy during times when it's not in
regular use (when you are on vacation/holiday for example).
By selecting this function the temperature of the freezer compartment will automatically be set to
-18°Cand the fridge compartment will be turned off.
To use the vacation mode you must press the mode button until the vacation icon is lit on the display.
To exit the vacation mode press the mode button until no mode icon is lit on the display.
Important note: If this mode is selected then all food and drinks must be removed from the fridge
compartment
18