Cameo CLZP100DTW Bedienungsanleitung Seite 9

SLAVE MODE (Slave)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the "Slave" menu option (note arrow)
and confirm with ENTER. Connect the slave and master units (same model) using a DMX cable, and activate one of the standalone modes
(Auto, Static) on the master unit. The slave unit will now follow the master unit. If there is no control signal, the numbers on the display will
begin to flash. This flashing will stop as soon as a control signal is received.
---------- Menu ---------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Information
DEVICE SETTINGS (Settings)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the "Settings" menu option (note
arrow) and confirm with ENTER.
---------- Menu ---------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Information
This will take you to the submenu for setting the following submenu options (select using UP and DOWN, confirm with ENTER, change value
or status using UP and DOWN, confirm with ENTER):
Settings (bold = factory setting)
Display
= Rotates the display
Reverse
Display Display and control field
=
Backlight illumination
Operating status if DMX
DMX Fail =
signal is lost
Imitates color drift of a halo-
gen spotlight when dimming.
The dimming of the spotlight
Red Shift = automatically changes the
color temperature along a
rising curve of warm white
and amber (and vice-versa).
Dimmer
= Dimmer curve
Curve
Dimmer
= Dimmer response
Response
Mode
Slave
On Display rotates by 180° (for overhead installation)
Off Display does not rotate
On Permanently on
Off Deactivates after approx. 30 seconds of inactivity
Hold Last command is held
Blackout Activates blackout
Off Color drift deactivated
On Color drift activated
Linear Light intensity increases linearly with DMX value
Light intensity can be finely adjusted at lower DMX values and
Exponential
broadly adjusted at higher DMX values
Light intensity can be broadly adjusted at lower DMX values
Logarithmic
and finely adjusted at higher DMX values
Light intensity can be finely adjusted at lower and higher DMX
S-curve
values, and broadly adjusted at medium DMX values
The LED spotlight responds abruptly to changes in the DMX
LED
value
The spotlight behaves like a halogen spotlight with soft
Halogen
changes in brightness
9