Inhaltsverzeichnis
Werbung
6.2
Mode of operation
The area of intrest, the operation area is picked up optically via the endo-
scope, displayed via the endocoupler onto the CCD sensor and then
converted and amplified into electrical signals. The image brightness is
automatically controlled according to the light intensity („autoshutter").
Camera signals are supplied to the smartbox via a camera cable and are furt-
her amplified for monitor display.
The video signal processed in this way is subsequently applied to the CCD
camera controller output socket for monitor, video recorder, video printer
and PC-connection use.
7
Possible Combinations
7.1
Endoscopes
All endoscopes with ACM-compatible eyepieces can be adapted to the
camera head. Depending on the type of your Compact camera it is especi-
ally applicable with image bundle endoscopes by the use of an anti-moiré-
filter.
7.2
Video accessories
Peripherals (monitor, printer, recorder, PC, video still storage) which corre-
spond to the video standards PAL or NTSC (depending on the camera
module) and which can analyze the signals S-VHS or VHS can be connec-
ted to the smartbox.
8
Safety Notes
It is in no case allowed that the unit is used in explosive environ-
ment. Please make sure that the units are only used in dripping
water proofed areas. Never dip the smartbox in liquids.
Routinely inspect all electrical connections. Defects like loose
plugs, defec-tive camera cables or others are interfering safety
and image quality and have to be eliminated immediately. The
units are only allowed to be used in technical unobjectionable con-
dition for the defined purpose according the instruction manual.
24
Werbung
Inhaltsverzeichnis
