Cleaning And Maintenance; Guarantee; Disposal - Waeco ECL-75 Montage- Und Bedienungsanleitung

_ECL-75_102.book Seite 44 Donnerstag, 6. Mai 2010 4:43 16

Cleaning and maintenance

Note
The voltage scale shown on the charging current distributor is a guide. If
different values are set, these must be checked using a suitable voltage
measurement device. An externally adjustable laboratory power supply can be
connected to terminals GND and D+ for this purpose.
➤
Insert the screwdriver into the axis of the potentiometer (see fig. 8, page 10). Turning
the axis clockwise increases the voltage threshold value, turning it anti-clockwise
reduces the voltage threshold value.
Note
Due to information presently available, we do not recommend a cut-off voltage
less than 11.5 V.
9 Cleaning and maintenance
Caution
Never clean the device under running water or in dish water.
Caution
Do not use abrasive cleaning agents or hard objects during cleaning as these
can damage the device.
➤ Wipe the outside with a damp cloth.
10

Guarantee

Our general guarantee conditions apply. If the product is defective, please return it to
the customer service address in your country (see the back of the instruction manual for
the addresses) or to your dealer. For repair and guarantee processing, please include the
following documents when you send in the device:
a copy of the receipt with purchasing date
a reason for the claim or description of the fault
11

Disposal

➤
Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you need to scrap the device, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable
disposal regulations.
44
ECL-75, ECL-102