Safety Description - Zoef Robot Bep BP200Z Gebrauchsanweisung

Safety Description

Please read the following safety descriptions and follow all these safety prevention. measures
before using the product.
Note：
1. Only technicians authorized by us can disassemble the product and users are not recommended to
disassemble it by themselves.
2. This product can only use exclusive power adapters and other adapters may cause damage.
3. Please don't touch electric wires, sockets or power adapters when hands are moist.
4. Please don't let cloth curtains or any body parts rolled to moving parts of the product.
5. Please don't put the product near to cigarette ends, lighters or other open res.
6. Please don't bend electric wires excessively or put heavy or sharp objects on the machine.
7. The product is for indoor use only. Please don't use it outdoors.
8. Please don't sit on the product.
9. Please don't use the product in moist environments like bathrooms.
10. Before using the product, please move all fragile objects (such as glass cups, lighting xtures, etc.) and
other objects which are likely to entangle the side brushes and suction channel (such as electric wires,
paper scraps and curtains) on the ground.
11. Please don't put the product where it is easy to fall o (such as tables and chairs).
12. Please turn o the power switch at the bottom of the machine when the product is not used for a long
time.
13. Carefully check whether the power adapter has been connected well with the socket before using.
14. To prevent stumbling, other members in the room should be informed when the product is operating.
15. The product may not cross a step which is over 15mm high.
16. Service temperature of the product ranges from 0°C to 40°C and it should not be used under high
temperature.
17. The battery must be removed from the appliance before it is scrapped.
18. The appliance must be disconnected from the supply mains when removing the battery.
19. If the machine has no reaction when it is started, please check whether the switch at the bottom of the
machine has been turned on; if there is still no response, it is necessary to move the machine manually to
the home base, and try starting it again after it is fully charged.
Please read the Manual carefully.
Please keep the Manual appropriately.
Any operation not conforming to the Manual may cause the
product to be damaged.
EN-1